Zur Hauptnavigation springen Zum Inhalt springen

News About Software Update 04.03.19.04

| Newsletter-Box

Sehr geehrter Leser,

Sie verwenden Hardware von Datafox oder haben in der Vergangenheit Geräte von uns erworben. Aus diesem Grund möchten wir Sie über das neue Firmware-Release informieren.

Mit dem Software-Paket steht ein neues Release bereit, in dem Korrekturen vorgenommen und weitere Funktionen inkludiert wurden. Sofern in der Änderungsliste zum neuen Release für Sie relevante Punkte enthalten sind, empfehlen wir Ihnen dieses zeitnah freizugeben und sowohl für Neuprojekte als auch Bestandsprojekte einzusetzen.

Die neue Version haben wir für Sie zum DOWNLOAD auf unserer Website gestellt. Einfacher geht es, wenn Sie das DatafoxStudioIV updaten und über die Update-Funktionen auf der Startseite die Updates auswählen und übertragen. 

Bitte testen Sie das neue Software-Paket – vor dem echten Einsatz – zusammen mit Ihrem Setup und Ihrer Anwendung und geben dieses intern frei. Sofern Sie Probleme in Verbindung mit Ihrem Setup oder Ihrer Anwendung feststellen, möchten wir Sie bitten, uns diese unmittelbar mitzuteilen.

Wir werden die Auslieferung bestellter Geräte ab sofort auf das neue Firmware-Release umstellen.
 

Latest Updates

You can find a detailed list of all changes HERE.

An Overview of the Most Important Enhancements

Datafox EVO 5.0 Pure Will Be Available with 2 Display Types in the Future

The EVO 5.0 Pure is a compact and cost-effective terminal for time tracking and access control. 

The terminal is currently equipped with a capacitive touchscreen. Datafox is currently developing an additional version with a resistive touchscreen. This will allow the EVO 5.0 Pure to be operated even while wearing thick work gloves. 

Note: The setup files are compatible with the EVO 4.6 FlexKey. Availability with capacitive touchscreen: Series production begins in July 2022; test units can be ordered now. 

 

 

Access Control: Change to Automatic Timing

Background: When reversing a clock-in using a time model, the elapsed time “-1” was ignored—only “STD” was accepted. With this release, “-1” and “STD” are once again accepted.

Am I affected by this change?

The change affects the Action.txt and Action2.txt lists. The change may affect you if you use automatic time control. This is the case if there is an entry other than 0 in the RefTimeRelais column in the Action.txt or Action2.txt lists.

If you have used different IDs as described in the manual and the entries in the RefTimeRelais column are different, you are not affected.

The following figure shows an affected configuration:
 

What has changed?

When an action was triggered by the automatic timer, other entries in the action list with the same ID were also executed. For example, in the example above, when the third action was executed via the time model, the fourth action (also ID 100) would also be executed, and the device would switch to “Free Access.”
 
With firmware version 04.03.19.04, only the entry with the currently applicable time model in the “RefTimeRelais” column is executed—in this case, the row with RefTimeRelais = 2. Before the change, both rows with ID=100 were executed immediately one after the other.

If you are unsure whether you can fully assess the implications, please contact Datafox Support. They will assist you in finding a solution.
 
Do you have any suggestions or questions for us? We always welcome your feedback and are happy to assist you with any inquiries by phone at
+49 (0) 36967 / 595-0 or by email at support(at)datafox.de.

Submit a Request

Your Datafox Support Team